en
11
User manual Jamajka G
www.igloo.pl
4. EXPLOITATION
Temperature of the heated exhibition space may vary. It depends on numerous factors, such as amount and tempe-
rature of products placed in the device and temperature of the surroundings. The device should be placed in a dry
and well-ventilated place.
Remarks and indications
• Before placing hot products in the display cabinet, an empty display cabinet should operate until the
desired working temperature shall be obtained
• Do not place cold products in the device
• Do not block ventilation holes, as it could hamper the hot air circulation inside the device Fig.8/1; 3 (p.13)
• Goods stored on the shelves of the display cabinets need to be placed in a manner ensuring even load
of the shelves and free
fl
ow of hot air.
4.1. Temperature regulation
Heated device is equipped with mechanical temperature regulator. Set the desired water temperature inside the
device Fig.4/5 (p.11) with the help of regulating knob by turning it and setting in proper position. Turning the knob
clockwise increases the set temperature, and turning it in the opposite direction causes its decrease. Turning the
knob left, until it reaches the
fi
nal position turns off the heaters, despite the fact that the power supply is activated.
Fig.4 Control panel
1 – Main switch – for electric heater
2 – Lighting switch – for bulbs inside the device
3 – Red control diode – lack of water or low water level (this is not an alarm signal!)
4 – Green control diode – proper water level
5 – Temperature regulator knob
3
4
5
1
2
