background image

Electrical Requirement

•  Make sure there is a suitable power Outlet (115 volts, 15 amps 

outlet) with proper grounding to power the freezer. 

•  Avoid the use of three plug adapters or cutting off the third grounding 

in order to accommodate a two plug outlet. This is a dangerous 

practice since it provides no effective grounding for the freezer and 

may result in shock hazard.

•  Avoid the use of an extension cord because of potential safety haz-

ards under certain conditions. If it is necessary to use an extension 

cord, use only a 3-wire extension cord that has a 3-blade grounding 

plug and a 3-slot outlet that will accept the plug. The marked rating of 

the extension cord must be equal to or greater than the electrical rat-

ing of the appliance. 

DO NOT USE EXTENSION CORD LONGER 

THAN 12 FT.

•  Do not install your freezer in any location not properly insulated or 

heated e.g. garage etc. Your freezer was not designed to operate in 

temperature settings below 55˚ Fahrenheit. 

•  Select a suitable location for the freezer on a hard even 

surface away from direct sunlight or heat source e.g. radiators,  

baseboard heaters, cooking appliances etc. Any floor unevenness 

should be corrected. 

Install Limitations

Use of Extension Cord

WARNING:

 ELECTRICAL REQUIREMENT - SHOCK HAZARD

5

Summary of Contents for FRF452-C














Reviews: