background image

Cleaning and Maintenance
Warning: 

   

  

To avoid electric shock always unplug your freezer before 

cleaning. Ignoring this warning may result in death or injury.

 Caution:

  

 Before using cleaning products, always read and follow  

manufacturer’s instructions and warnings to avoid personal 

injury or product damage.

 General:

 

•   Prepare a cleaning solution of 3-4 tablespoons of 

baking soda mixed with warm water. Use sponge or soft 

cloth, dampened with the cleaning solution, to wipe down 

your   freezer.

 

   

•  Rinse with clean warm water and dry with a soft cloth.

 

   

•         Do not use harsh chemicals, abrasives, ammonia, chlorine 

bleach,concentrated detergents, solvents or metal scouring 

pads. SOME of these chemicals may 

dissolve, damage and/or discolor your  freezer.

 

 

•  Clean door gaskets every three months according to  

general instructions. Gaskets must be kept clean and pliable 

to assure a proper seal.

 

  

•   Petroleum jelly applied lightly on the hinge side of gaskets 

will keep the gasket  pliable and assure a good seal. 

Proper Freezer Care and Cleaning

Door Gaskets:

9

Summary of Contents for FRF452-C














Reviews: