background image

 

REFRIGERATION LTD 

 

Pastry Display Cases

 

| www.igloorefrigeration.com

 

 

1 UNLOADING 

The unit should be transported in vertical position and properly secured and packed.    

2 PROPERTIES OF THE UNIT 

 

 

 

2.1. Purpose 

“C2URP” series display cases are universal cooling devices that are aimed to display and are used for short-term 
storage for confectionery goods (such as cakes, cookies, desserts… etc.) in temperature b1ºC and +4ºC 
with ambient temperature b15ºC and +25ºC and relative air humidity up to 55%, depending on the 
environment and the location of the unit. 

2.2. Description of the unit   

“C2URP” series display cases have a dynamic cooling system. All units are equipped with automatic condensate 
evaporation and automatic defrosting. The electronic thermostat cooperates module to monitor and send signals 
when the temperature inside the equipment gets too low or too high. They can be supplied with self-contained or 
remote compressors. Glass shelves fixed on the frame make the exhibitive part of display cases. The height and 
angle of the shelves are adjustable. These display cases use energy-saving LED lighting.  Our equipment is 
manufactured in accordance to modern technologies and has all certificates required by law. 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The description in this box signifies important information for user security and for 
proper operation of the device. 

Summary of Contents for C2URHP2
















Reviews: