12
The unit is
noisy?
Problem
Cause
Solution
Unit stands uneven!
Ensure that the unit is standing on a
flat even surface.
The compressor
doesn’t work?
The overheating
protection has activated!
Wait until the unit has cooled
down before trying again
Remote control
doesn’t work?
The batteries are
drained!
Replace with new batteries.
Remote control signal
not being picked up by
the control panel!
Ensure you are not too far
away from the unit.
Make sure the remote control is
correctly aimed at the control panel.
The unit doesn’t
seem to cool the
room down?
Is there direct sunshine
in the room?
Close any curtains or blinds.
Too many windows or
door open!
Close a door or window to
reduce the loss of cold air.
Is there something in the
room producing heat?
Turn any heater etc. off.
The filters are dirty!
Clean or replace filters.
Air inlets or outlets are
blocked!
Confirm that there is nothing
obstructing the inlets and outlets.
MAINS PLUG FUSE REPLACEMENT
Fuse Cover
Fuse Replacement (Class I)
This appliance must be eathed. Remove the fuse cover with a small
flat head screw driver. Take out the fuse and replace with a new fuse
of the same Amp. Replace the fuse cover and push back into place.
