11
CLEANING AND MAINTENANCE
Important: Always unplug the unit from the socket before cleaning. To maximise efficiency of the unit
clean regularly.
Cleaning the Housing
Use a soft, damp cloth to wipe the body clean.
Important: Do not use chemicals, detergents, chemicals or abrasive solutions to clean the unit.
Cleaning the Air Filter
• Use a vacuum cleaner or tap the filter lightly to remove loose dust and
dirt from the filters and then rinse thoroughly under running water
(no hotter than 40°C). Ensure filters are completely dry before replacing.
Important: It is not recommended to operate the unit without the filters.
Important: The Active Carbon Filter is not washable.
Storage
• Switch off and unplug from the socket.
• Drain away any excess water from the unit, then set the
unit to Fan mode for a few hours, this will allow the inside of the
unit to thoroughly dry.
• Clean Air Filters or change the filters (Note: Cleaning for the Air
Filter can be found on previous page).
• Wrap the cord around the cord storage pegs (Fig 18).
• To protect the unit against dust, store in a dry place,
not accessible by children
Fig18.
Power cord
TROUBLE SHOOTING
It is not recommended to try and repair or dismantle the unit yourself. If you have any concerns
regarding the unit please contact Igenix Tel: 01473 271 272 or www.igenix.com
The unit does
not function?
Problem
Cause
Solution
No power supply!
Is the unit plugged in?
Has there been a power cut.
Timer function set!
Confirm that the Timer function is
not set, deactivate if needed.
Full Water Indicator
flashing!
Empty Water Tank.
Is the room temperature
below the set
temperature?
Change the temperature
on the unit.
Contnined...
