background image

5

the unit will need to be manually restarted.

21. Ensure the water is changed regularly, particularly in warmer 

temperatures to prevent the water stagnating and creating 

odours. If the indoor temperature is below zero, it is best to use 

warm water for humidification.

22. Do not place the unit directly below the power outlet.

23. Do not use the unit around the tub, sprinkler or swimming pool.

24. Product repair must be carried out by a qualified service 

engineer.

25. To protect against the risk of electrical shock, do not immerse 

the unit, cord or plug in water or other liquid.

26. If a damp cloth has been used to wipe the unit, ensure it is dried 

again with a dry cloth.

27. Please note that high levels of humidity in a room can lead to 

build up of mould. Humidity levels should always be controlled 

inside the home wherever possible to prevent this from 

happening.

28. Do not permit the area around the humidifier to become damp 

or wet. If dampness occurs, turn the output of the humidifier 

down. If the humidifier output volume cannot be turned down, 

use the humidifier intermittently. Do not allow absorbent 

materials, such as carpeting, curtains, drapes, or tablecloths, to 

become damp.

RULES FOR SAFE OPERATION

1.  Never insert fingers, pencils, or any other object through the 

grille when air cooler is running.

2.  Disconnect air cooler when moving from one location to 

another.

3.  Be sure air cooler is on a stable surface when operating to avoid 

overturning.

4.  DO NOT use air cooler by a window, as rain may create 

electrical hazard.

5.  Household use only.

Summary of Contents for IG9706

















Reviews: