11
Guidance on the disassembly and installation of honeycomb filter parts
1. Remove the honeycomb filter support.
2. Rotate the bottom locking mechanism 90
degrees anticlockwise, and then remove the
honeycomb filter.
3. Take out the honeycomb filter for cleaning.
With a mild detergent and a soft brush, scrub
the honeycomb filter with clean water and
then leave to dry fully before placing back into
the filter support.
4. Re-install the honeycomb filter support
once all pieces are clean and dry.
Replace water
After the Cool Wind function has stopped for 2 minutes, you
can then remove the water tank to refill it, as the water will have
returned to the water tank after being circulated through the unit.
Stop the Cool
Wind function
for 2 minutes.