3
Before First Use
Clean the hand blender by holding inside a cup or bowl of warm water and turning the power on for a few seconds.
Please Note: When cleaning do not run the hand blender for longer than 15 seconds.
Using Your Hand Blender
Important: The blades are extremely sharp, handle with care. Ensure that the hand blender is unplugged before
assembling, disassembling or cleaning the blades.
1. To assemble the detachable shaft with the motor unit, turn the shaft in an anti-clockwise direction until
tightened. To disassemble turn clockwise.
2. Plug the hand blender into the mains power outlet.
3. Lower the hand blender into a suitable mixing bowl and depress and hold either the low or high speed switch at
the top of the motor unit.
4. To stop the hand blender take your finger off the switch.
Cleaning and Maintenance
•
Unplug the hand blender from the mains power outlet.
•
Remove the detachable shaft from the motor unit. Do not immerse the motor housing in water or any other
liquid.
•
Wash the detachable shaft under running water. Place the stem on the draining board upright so that the
excess water can drain away. The detachable shaft is dishwasher safe.
•
Wipe the motor unit with a soft damp cloth. Do not immerse in water.
•
Ensure all parts are dry before re-assembling.
Quick Wash: Clean the hand blender by holding inside a cup or bowl of warm water and turning the power on for
a few seconds. Please Note: When cleaning, do not run the hand blender for longer than 15 seconds.
IG8650 – Hand Blender at a Glance