5
OPERATING INSTRUCTIONS
• Open the top cover and fill the water tank with cold drinking water. The water level should not
exceed MAX level as indicated on the water gauge.
• Ensure the funnel and permanent filter is clean and fitted correctly.
• Add ground coffee, with the spoon provided, into the permanent filter. Usually a cup of coffee needs a
level spoon of ground coffee. But you may adjust according to personal taste. Close the top cover.
• Insert the glass carafe on to the warming plate horizontally.
• Plug the power cord into the mains wall socket, ensuring it is switched on.
• Press the ON/OFF button. The indicator will be illuminated and the brewing process will commence.
Note: During the brewing process you may remove the glass carafe to serve. The coffee maker will stop
dripping automatically. If the serve time exceeds 30 seconds, the coffee may overflow the funnel and filter.
• Upon completion of brewing the coffee, (aproximately one minute after the coffee has stops dripping
out) you can remove the glass carafe , pour and serve.
Note: The volume of brewed coffee will be slightly less than the water you have added to the tank, as
water is absorbed by ground coffee. DO NOT touch the cover or the warming plate when operating as
they are very hot.
• When the process is finished, if you do not want to serve immediately, leave the appliance switched
on and the warming plate will keep coffee warm up to 40 minutes. The appliance will be cut off
automatically after 40 minutes. For an optimum coffee taste, serve it just after brewing.
• Always turn the coffee maker off and disconnect the power supply after use.
Note: Be careful when pouring the coffee, as the coffee will be very hot and could cause scalding.
CLEANING AND MAINTENANCE
Caution: Always unplug the appliance from the manis wall socket and allow the warming plate to cool
completely before cleaning it. Never immerse the unit or power cord in water or any other liquid for
cleaning.
• Clean all detachable parts after each use in hot, soapy water.
• Wipe the exterior surface with a soft, damp cloth to remove stains.
• Water droplets may buildup in the area above the funnel and drip onto the product base during
brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use of
the product.
• Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
• Replace all detachable parts
Summary of Contents for IG8127
Page 9: ...9 ...
