![background image](http://html1.mh-extra.com/html/igenix/ig7601/ig7601_user-manual_3949293006.webp)
6
Boil Dry Protection
Should you accidentally operate the kettle without water; the boil-dry protection will automatically
switch off the power. If this occurs, allow the kettle to cool before filling with cold water to re-boil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the wall socket and allow it to cool down completely before
cleaning.
• Never immerse the kettle, power cord or power base in water, or allow moisture to contact
with these parts.
• To clean the exterior, wipe with a soft damp cloth and then dry thoroughly with a soft dry cloth.
• Remember to regularly clean the filter. For easier cleaning, detach the filter, clean with soapy water,
rinse, dry and then replace.
• Clean the base using a clean, dry cloth
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the kettle
to prevent damage to the finish.
Descaling
Your kettle should be descaled regularly to prevent a build-up of limescale in the interior, as this may
cause the kettle to operate less efficiently. You can use any household descaler and follow the instructions
on the packaging.
FUSE REPLACEMENT
Fuse Replacement (Class I)
This appliance must be earthed. There are 3 screws on the plug,
remove them and open the shell. Take out fuse and replace with a new
fuse of the same Amp. Install the shell again and tighten the screws.
Summary of Contents for IG7601
Page 9: ...9...