- 4 -
Water Pressure
For best operating results, incoming water pressure should be between 0.03 ~1Mpa. It is important to
maintain the water supply. The water inlet hose will be pressurized during the washing cycle.
For Best Results
Your dishwasher cleans by spraying a mixture of hot clean water and detergent against the soiled surfaces
of the dishes. The water is pumped through a rotating spray arm, drained through a filter removing food and
soiled particles and pumped back through the spray arm.
Soiled water is pumped out and replaced with clean water at the end of each cycle (the number of times
depends on the programme being used).
For best cleaning results, the water temperature must be at least 45-55 °C. To prevent dishwasher dama ge,
the temperature of the incoming water supply should not exceed 60°C.
Control Panel
Salt Refill Indicator Light
Display Window
Program
Delay Start
Program Start/Reset
Power Indicator light
Power On / Off
Loading the Dishwasher
The dishwasher is designed to carry a standard “4 piece” plate setting consisting of the following:
●
4 Dinner Plates
●
4 Soup Plates
●
4 Dessert dish
●
4 Saucers
●
4 Cups
●
4 Tea spoons
●
1 Oval platter
●
1 Small serving
●
1 Dish
●
4 Glasses
●
4 Soup Spoons
●
4 Forks
●
4 Knives
●
4 Dessert Spoons
●
2 Serving Spoons
●
1 Serving Fork
●
1 Gravy ladle
NOTE: For ease of loading/unloading large size dinner plates from the dish rack, it may be necessary to
temporarily remove the silverware basket. When loading/unloading is complete, return the silverware basket
to its original position.
