- 5 -
Using Your Dishwasher
Ensure that you scrape off all solid food particles from dishes. Remove excessive quantities of oil or grease.
Empty any liquids from glasses and cups.
Please note that dishes with dried-on foods are more difficult to wash and may not come clean in a normal
wash cycle.
IMPORTANT: Use only detergent specifically made for use in dishwashers.
Using the 3 in 1 Program
Your dishwasher has a 3 in 1 program which needs not salt and rinse aid but a 3 In1Dishwasher tablet. This
dishwasher comes with a 3 in 1 tablet container.
Note: Only 3 in 1 program uses 3 in 1 tablet. If using 3 in 1 tablet in other programs, the appliance will not
achieve the best performance.
1. Hang the 3 in 1 tablet container on the basket.
2. Put the 3 in 1 tablet into the container then start the 3 in 1 program.
Using a Rinse Aid Agent
Using a rinse aid can help prevent water marks on dishes and
glassware and also reduce drying time.
A rinse agent is specially formulated to rinse away food
and detergent residues that can be left behind on your
dishes. Used regularly, a rinse agent will automatically provide
you with cleaner dishes every time you wash.
To fill the rinse agent dispenser unscrew the dispenser cap
located on the inner door. Add the rinse agent slowly into the
container until it just reaches the bottom of the filling cap inside
the dispenser opening. Replace the cap.
The dispenser automatically releases the rinse agent into the final rinse water at the end of the wash cycle.
The dispenser holds approximately 100 ml of rinse agent.
How to Use the Water Softener
The hardness of the water varies from place to place.
If hard water is used in the dishwasher, deposits will be formed
on the dishes and utensils. This appliance is equipped with a
water softener which uses a salt specifically designed to eliminate
the minerals from the water.
IMPORTANT: Only dishwasher salt can be used in this appliance.
How to Load the Salt into the Softener
●
To unscrew the cap from the softener turn in an anti-clockwise direction, the salt container is located on the
right hand side of the inner tub.
●
When filling for the first time pour half a pint of water in to the salt container.
●
Load 500g of salt into the salt container. This will last for approximately 30 full wash loads.
●
Fill the salt into the salt container until a small amount of water comes out. This is very important when
you use the dishwasher for the first time. When you have added all the 500 grams of salt and water still does
not come out add a little more water. The salt indicator light will go out after a few wash cycles.
●
Screw the cap back carefully.
Please Note: Load the salt before the beginning of wash cycle so as to prevent corrosion to the tub.
Using the Intensive Wash Program
The Intensive wash feature gives you the option of washing and drying dishes at very high water
temperatures. When activated, the intensive wash feature energizes a heating element that will raise and
maintain the internal water temperature of the dishwasher at 69ºC.
