background image

9

INSTALLATION

Location and Air Circulation

When selecting a position for your freezer, you should make sure the floor is 
flat and firm and the room is well ventilated with an average room temperature 
of between 16°C and 38°C. If the room temperature drops below this, the 
appliance may start to defrost.

Locate your freezer away from sources of heat e.g. cookers, radiators, direct 
sunlight as extreme temperatures will affect how efficiently your appliance works.
Also avoid direct sunlight as it may increase the electrical consumption, extreme 
cold ambient temperatures may also cause the unit not to perform properly. The 
freezer is not designed for use in a garage or outdoor installation; do not drape 
the unit with a cover.

Never place the freezer in a wall recess or fitted cabinets or furniture as this will 
not allow adequate ventilation and cause a potential fire hazard. When installing 
the unit, ensure that 40mm of free space is left at both sides, 15mm at the rear 
and 20mm at the top of the unit. This will allow cold air to circulate around and 
improve efficiency of the cooling process.

Providing you follow the recommended ventilation requirements you will:
•  Increase the life of the freezer
•  Minimise the risk of condensation on the outside of the freezer
•  Minimise the running costs
•  Minimise operating noises caused by vibration.

Leveling

Once the appliance is positioned in its final location, it can be leveled using the 
adjustable feet at the front of the appliance until they are firmly placed on the 
floor. Correctly leveling the freezer will stop any rocking or vibration and keep 
the door aligned, which helps the appliance run reliably and efficiently.

Summary of Contents for IG350F





















Reviews: