background image

 

•  DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.

•   To ensure that your child gets all the protection designed into this restraint you

   MUST read and:-

   Use the restraint exactly as shown in the instructions.

   Fit the restraint firmly to the car seat.

   Fit the harness firmly to the child.

   A loose restraint or harness is dangerous.

   Do not alter or modify this restraint.

   DO NOT USE A REAR FACING CHILD RESTRAINT WHERE AN AIRBAG IS  
   FITTED IN FRONT OF THE SEATING POSITION.
•  DO NOT USE THIS SAFETY SEAT WITHOUT ITS COVER
•  Supervision of children is needed because they may be able to undo

   buckles.

•  Failure to follow these instructions may result in your child striking the

   vehicle’s interior during a sudden stop or crash.
•  To ensure baby’s back is evenly supported, do not put more than one nappy

   on the baby and make sure the nappy is not thickly folded at the back. 
•  Repairs must only be done by the manufacturer or agent.
•  Destroy the restraint if it has been in a severe crash, even if no damage is

   visible.
•  Do not allow the restraint to come into contact with polishes, oils, bleach and 

   other chemicals
•  Clean with mild soap and water.
•  Do not allow sharp or heavy objects to be loose in the vehicle.
•  Anything loose can be deadly in a crash.
•  Premature infants may have difficulty breathing when in a sitting position.
•  Consult your doctor before using this or any restraint with a premature infant.
•  Child restraints and their components can become very hot in sunlight.
•  Always check the restraint for heat before putting a child in the seat.
•  Make certain children are shaded from direct sunlight while in a well

   ventilated vehicle.
•  Do not allow a child to have anything like a bottle, lollipop or ice-cream on a

   stick. A bump or swerve could cause these objects to injure your child.
•  Straps may be damaged by unsecured cargo in a collision. Secure or remove 
   hazardous cargo before using this strap. Hatch-back or wagon: Do not use the child 
   restraint where this strap may fall into a split in the seat back.
•  Always attach hook and remove slack.

   
Please contact IGC Dorel Customer Service with any questions or concerns.  

  

WARNING 

3

Summary of Contents for CCA 2010

























Reviews: