CARE INSTRUCTIONS
•
Seat trim may be removed for cleaning. Don’t forget to remove the instruction
manual.
•
Machine wash in cold water, delicate cycle.
•
Tumble dry 10-15 minutes on low heat.
•
Do not dry clean.
•
All other surfaces should be cleaned with a mild soap and water.
•
Never clean with bleach or spirit-type cleaners.
•
Do not use the restraint without the cover.
•
Check the webbing for fraying.
REMOVE TRIM FOR CLEANING:
Remove Harness Straps From Splitter Plate
Fully loosen harness straps. From the back
of the restraint, remove both harness straps
from splitter plate.
Remove Harness Straps
Feed harness straps throught headrest.
To Remove trims
Headrest Trim
: Move headrest to highest position.
Remove trim from 2 plastic hooks at back of headrest.
Pull the plastic harness guide with one hand while pulling
off the headrest trim around it. Repeat same process on
the other side and remove trim.
Seat Trim
: Adjust backrest to lowest position.
Release the elastic straps on the back of the child
restraint. Pull pad off the top of child restraint and
around headrest. Replace trim by reverse order.
19
2
Harness Guides
Fig 39.
Fig 37.
Fig 38.
Summary of Contents for CCA 2010
Page 22: ...21 NOTE ...
Page 23: ...22 NOTE ...
