4 / 4
P/N 1073642-EN
• REV
D
• ISS
03JUL22
Note
:
For added security, a logged in user is automatically
logged out after five minutes of inactivity.
Saving the configuration
The running configuration file is stored in the RAM of the
industrial managed switch. In the current version, the running
configuration sequence of running
-
config can be saved from
the RAM to FLASH by executing the Save Configuration
command. After doing this, the running configuration sequence
becomes the startup configuration file
(i.e., the
saved
configuration)
.
To save all applied changes and set the current configuration
as a startup configuration, the startup
-
configuration file is
loaded automatically
across a system reboot.
1.
Click
System
>
Save Startup Config
.
2.
Click the
Save Configuration
button.
Resetting the switch to default
To reset the IP address to the default IP address
“192.168.0.100”
and the user
password to factory default mode
(default password is
“
admin
”
), press the hardware reset button
on
the front panel for about
10
seconds. After the device is
rebooted, log
in to the management web
interface within the
same subnet of 192.168.0.xx
and default password.
N
ote
that
all the previous setups are erased
after the factory default
reset.
Figure 6: Reset button
Contact information
Europe, Middle East, and Africa
W
Go to www.firesecurityproducts.com/en/contact
Australia
E
Legal
Copyright
© 2022
Carrier. All rights reserved.
Specifications subject to change
without prior notice
.
This document may not be copied in whole or in part or
otherwise reproduced without prior written consent from
Carrier, except where specifically permitted under US and
international copyright law.
Trademarks and patents
IFS
names and logos are a product brand of Aritech, a part of Carrier
.
Other trade names used in this document may be trademarks
or registered trademarks of the manufacturers or vendors of
the respective products.
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd, Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRENSENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Certification
Contact information
https://firesecurityproducts.com
https://firesecurityproducts.com.au/
Product documentation
Please consult the following web link to retrieve the electronic
version of the product documentation. The manuals are
available in several languages.
