ifs NS3550-8T-2S-V2, Quick Installation Manual

Page: 1 / 4

P/N 1073642-EN • REV D • ISS 03JUL22 1 / 4
NS3550 -8T- 2S - V2 Quick Installation Guide
Figure 1: NS3550-8T-2S-V2 Industrial L2+ Multi-Port Managed
Ethernet Switch
Package contents
Thank you for purchasing the NS3550 -8T- 2S - V2 IFS L2+
industrial managed switch . T he description of this model is as
follows :

Industrial L2+ 8- Port 10/100/1000T

+ 2- Port 100/1000X SFP Managed Switch
Unless specified, the term “ industrial managed switch ”
mentioned in this quick installation guide refers to the NS3550 -
8T- 2S - V2 .
Open the box of the industrial managed switch and carefully
unpack it. The box should contain the following items:

T he industrial managed switch × 1

Quick installation guide × 1

DIN rail kit × 1

W all mounting kit × 1

Dust cap (see the table below)
RJ45 Dust Cap SFP Dust Cap
NS3550 -8T- 2S - V2 8 2
If any of these are missing or damaged, contact your dealer
immediately. If possible, retain the carton including the original
packing materials for repacking the product in case there is a
need to return it to us for repair.
Requirements
The industrial managed switch provide s a remote login
interface for management purposes. The following equipment
is necessary for further management:

Workstations running Windows
®
XP / 2003 / Vista / 7 / 8 /
2008 / 10 , MAC OS X or later, Linux, UNIX, or other
platforms are compatible with TCP/IP protocols.

Workstations are installed with Ethernet NIC (Network
Interface Card) .

Ethernet port connection

Network cables – U se standard network (UTP) cables
with RJ45 connectors.

The above workstations have a web browser and
JAVA runtime environment plug - in installed .
Note : We recommend using Internet Explorer 11 .0 or later to
access the industrial managed switch . If the web interface of
the managed switch is not accessible, turn off the anti - virus
software or firewall and then try it again.
Wiring the power inputs
The upper panel of the industrial managed switch indicates a
DC inlet power socket and consists of one terminal block
connector within six contacts. Follow the steps below to insert
the power wire :
1. Insert the positive/negative DC power wires into contacts 1
and 2 for Power 1 , or 5, and 6 for Power 2.
NS3550 -8T- 2S - V2: DC 12 to 48 V, 24 VAC
Figure 2: Managed industrial switch upper panel
2. Tighten the wire - clamp screws to prevent the wires from
loosening.