10
MC352-4P-2S-V2 User Manual
1
2
3
4
5
6
Power 1
Fault
Power 2
+
-
+
-
Note
:
The wire gauge for the terminal block should be in the range between 12 and 24
AWG.
Wiring the Faulty Alarm Contact
The faulty alarm contacts are in the middle of the terminal block connector as the
picture shows below. Inserting the wires, the Industrial Gigabit PoE+
Switch will detect
the fault status of the power failure and then forms an open circuit. The following
illustration shows an application example for wiring the faulty alarm contacts.
Note
:
1. The wire gauge for the terminal block should be in the range of
12 ~ 24 AWG.
2. Alarm relay circuit accepts up to 24 V, max. 1 A currents.
Grounding the Device
The device must be correctly grounded to avoid serious damage.
Insert
the wires into the fault alarm contacts
