21
V1.1
9.2.1 - Manual Operation (back-up system to the electrical pump)
Check that the manual release valve is closed (Fig.9). After checking that the rear of the trailer is clear,
operate the manual pump lever to tilt the trailer body.
To lower the body, check that the area between the body and chassis is clear of obstructions then open the
manual release valve.
* Users should note that the remote control unit supplied is generally splash-proof, although it is not fully
waterproof. It should never be submerged and should be stored in the trailer when not in use to avoid
damage and possible erratic operation.
If a control unit has been accidentally submerged or is otherwise damaged it should be taken out of service
until it can be fully checked or ideally replaced with a new unit.