20
V1.1
The pump is operated from a remote control switch pad on a detachable lead. An isolator switch with
removable key is also fitted on the battery housing inside the trailer.
Ensuring the isolator switch inside the trailer has been turned clockwise through 90 degrees to switch on,
connect the remote control lead to the socket. After checking that the rear of the trailer is clear, operate
the ‘up arrow’ button on the remote control to tilt the trailer body.
During normal operation the ‘Green’ LED lamp on the remote control will be lit. If the ‘Red’ LED lamp lights
it will indicate that the battery charge is low - i.e. below 9V.
To return the trailer bed to the horizontal position, check that the area between the body and drawbar is
clear of obstructions and lower fully and press the red emergency stop button to prevent the risk of
accidental operation. Ensure that both body clamps on the drawbar are re-clamped before unplugging the
remote from the socket.
