iFocus DVRA+/B+/E+ Manual Version 4.2
Page 15 of 40
For Sequential mode,
a.
Under the camera view menu, press “2” to select “Spot
TV Out”
b.
Use “F
in
” or “F
out
” key to select “Seq” for the first
field
c.
Press right arrow key to move the cursor to the second
field
d.
Use “F
in
” or “F
out
” key to select interval
Figure 17 illustrates the setting of sequential mode spot TV display with the interval set to
3 seconds.
Selection of the intervals can be 1-15/ 20/ 30 seconds.
During the Trig Mode, spot TV displays the live view of the
latest channel that has been detected with either external
trigger or motion trigger. The live view will be displayed
throughout the trigger period and the delay period before the
monitor goes back to blak screen.
To set Trig Mode for Spot TV,
a.
Under the camera view menu, press “2” to select
“Spot TV Out”
b.
Use “F
in
” or “F
out
” key to select “Trig” for the first field
To ensure this feature is functioning properly, setting for the following parameters must
be correct:
a.
External trigger setting (if Spot TV is to monitor the cameras equipped with
external trigger, refer to Chapter 12.1)
b.
Motion trigger setting (if Spot TV is to monitor the cameras equipped with motion
detection, refer to Chapter 12.2)
c.
System trigger delay (refer to Chapter12.2.3)
d.
Trigger mode setting (this setting cannot be set to “Off”, refer to Chapter 11.6)
e.
Record (this setting should be turned “On”, refer to Chapter 11)
9.3
Camera Display Properties
iFocus DVR provides adjustment of brightness, color and contrast for individual camera.
To change the setting,
a.
Under the Camera View menu, press “3” for “Camera Display Properties”
The display would show the brightness, color and contrast in percentage for all the
cameras.
b.
Use arrow keys to select the parameters
c.
Use “F
in
” or “F
out
” keys to increase or decrease the property.
Camera View
1 View Mode
[4 Split]
2 Spot TV Out
[Seq]
[3sec]
3 Camera Display Properties
4 Camera Select
[Cam01]
5 --Set Camera Name
6 --Camera View
[ On]
7 --Camera SAE
[ On]
0 Exit
Figure 17: Menu, Spot TV Out
(Sequential mode)
Camera View
1 View Mode
[4 Split]
2 Spot TV Out
[Trig]
[Auto]
3 Camera Display Properties
4 Camera Select
[Cam01]
5 --Set Camera Name
6 --Camera View
[ On]
7 --Camera SAE
[ On]
0 Exit
Figure 18: Menu, Spot TV Out
(Trig mode)
