iFocus DVRA+/B+/E+ Manual Version 4.2
Page 31 of 40
13.2 Date/Time Playback
In the Date/Time Playback method, the same setting method of Date and Time fields
discussed in the Event Playback method is still applicable. Once the date and time fields
are entered, user can press the Play key “3” to start playing the recording video. If there is
no video available for playback, “No Video” will be displayed on all channels.
13.3 Playback Screen Setting
In the PLAYBACK menu, Playback Screen can be set to Auto/FULL/4/9/16.
Auto:
Playback screen will be adjusted automatically based on the number of
cameras selected for simultaneous playback.
FULL:
Playback the first selected camera in FULL screen
4:
Playback the first 4 selected cameras in 2x2 screen
9:
Playback the first 9 selected cameras in 3x3 screen (for 8/16-Ch DVR)
16:
Playback all the selected cameras in 4x4 screen (for 16-Ch DVR)
Users are recommended to set the Playback Screen to “Auto” mode in normal application.
13.4 Playback Control Function
Once in Playback mode, the MENU will disappear and the playback control is transfer to
the Playback Control Keys located on lower part of the IR controller
Key functions:
a.
Play: Play the next frame under
Single Frame Playback (SFP)
mode or resume playback when
the video has been paused
b.
Pause: pause playback
c.
Fast forward: change the
direction of playback to forward
or change the playback speed
from SFP to 8 times playback
d.
Backward: change the direction of playback to backward and speed adjusted to 8
times automatically
e.
Play next/ last: jump to the next or last event
f.
Stop: exit from the playback mode
During playback, the status bar display will be as shown below:
Figure 44: Status Bar, Playback
Figure 43: Remote Control Keys, playback control
Backward
Forward
Pause/ Play
Play last
Play next
Stop
Speed: [1.0] > [892 of 1290]
Rec 69%
01-12-2006 16:00:00
Playback speed
Playback direction
Current event
Current event
Record
percentage
Playback date
and time
