IFM ZB0929, Operating Instructions Manual

Page: 25 / 28

Gateway ZB0929
25
12.3.6.3 Firmware information and update
Substructure: [ip address]:8001/firmware
Profile: software/updateablesoftware
Available data points:
Data point Description Access
firmware
../installstatus Installation status r
../container URI for the new device firmware rw
../type Type of software to be updated (= firmware) r
../version Current device firmware r
r ... read only
rw ... read and write
Applicable services:
Services Description
../…/getdata Read the data point
../…/setdata Write the data point
../install Command to execute the installation/update
The first step to update the firmware is to write the URI to the data point container .
Afterwards, the service install can be executed.
12.3.6.4 Sensors connected to the gateway
For each connected sensor, an additional substructure with the corresponding data is created in the
nodes substructure. The fact that further devices are included in this structure is indicated via the
devicegroupmanager profile. The ../nodes/devicestatuschanged/datachange event can be
used to detect changes in the sensor list and thus in the nodes subtree.
Substructure: [ip address]:8001/nodes
Profile: devicegroupmanager
Available data points:
Data points Description Access
nodes
../devicestatus_changed Indicates whether the sensor list has changed r
../managed_devices_classes List of devices in the substructures (= VWV001|VWV002)
(Important: if no devices are available or if a higher-level system
wants to be informed about any new device)
r
r … read only
Available events:
Events Description
../devicestatus_changed/datachanged Event when the sensor list has changed