![background image](http://html1.mh-extra.com/html/ifm/sm2-00-series/sm2-00-series_operating-instructions-manual_4026452033.webp)
33
UK
10.1 Parameter setting in general
1� Change from the RUN mode to the main menu [Enter]
2� Select the requested parameter
[
▲
] or [
▼
]
3� Display of the set parameter value
[Enter]
4� Change to the setting mode
[▲] or [▼] > 1 s
(Display flashes, then permanent)
5� Modification of the parameter value
-incremental by pressing once
-continuous by keeping the button pressed
[▲] or [▼]
6� Acknowledge the set parameter value
[Enter]
7� Return to the RUN mode
> 30 seconds (timeout)
or
navigate through the menu levels
using [▲] or [▼] until the RUN mode
is reached�
10.1.1 Parameter setting in submenus
1� Change from the RUN mode to the main menu [Enter]
2� Change to the sumenus
[
▼
] till EF
[Enter]
3� Select the requested submenu
[
▼
] till CFG, MEM, EPD or SIM
[Enter]
4� Select the requested parameter
[
▲
] or [
▼
]
5� Display of the set parameter value
[Enter]
6� Changing the parameter value
→ 10.1 Parameter setting in general
steps 4-7