SDP110
Air gap sensor
22
9 Set-up
After power-on and expiry of the power-on delay time of approx. 1 s, the unit is in the normal operating
mode. It carries out its measurement and evaluation functions and generates output signals according
to the set parameters.
•
During the power-on delay time the outputs are switched as programmed:
– ON with normally open function (Hno / Fno)
– OFF with normally closed function (Hnc / Fnc).
•
If output 2 is configured as analogue output, the output signal is at 20 mA during the power-on
delay time.
When an IO-Link master is connected, the unit automatically switches from SIO mode (standard
input-output) to IO-Link mode.
