Flow meter compressed air
SDGx50
29
11.5 User settings (optional)
11.5.1 Standard display
u
Select the DIS menu.
u
Select [diS.L] and set the process value display:
•
L1 = current process value for flow
•
L2.Temp = current process value for flow and temperature
•
L2.Pres = current process value for flow and pressure
•
L2.Totl = current process value for flow and totaliser
•
L3.TP = current process value for flow, temperature and pressure
•
L4 = current process value for flow, temperature, pressure and current totaliser value.
u
Select [diS.U] and set the refresh rate of the display:
•
d1: High
•
d2: Medium
•
d3: Low
u
Select [diS.R] and set the orientation of the display:
•
0°, 90°, 180°, 270°.
u
Select [diS.B] and set the brightness of the display:
•
25 %, 50 %, 75 %, 100 %.
•
OFF: The process value display is switched off in the operating mode (energy-saving mode).
Error messages are displayed even if the display is deactivated. Display activation by pressing
any key.
11.5.2 Standard unit of measurement
Set the standard unit of measurement before all other parameter settings.
u
Select the CFG menu.
u
Select [uni.F] and set the unit of measurement: l/min, m
3
/h, m/s, ft
3
/m, ft
3
/h, ft/s.
The consumed quantity (meter reading) is automatically displayed in the unit of measurement
providing the highest accuracy.
u
Select [uni.T] and set the unit of measurement: °C or °F.
u
Select [uni.P] and set the unit of measurement: kPa, bar, psi.
11.5.3 Display colour setting
u
Select the COLR menu.
u
Select [coL.x] and set the colour of the characters of the process value display:
bk/wh, yellow, green, red, r-cF, G-cF.
coL.F = font colour for flow
coL.T = font colour for temperature
col.P = font colour for pressure
u
Select [cFH.x] and [cFL.x] and set the limits for the colour change: