![background image](http://html.mh-extra.com/html/ifm/sd25-series/sd25-series_operating-instructions-manual_620737030.webp)
30
Explanation submenu CFG
Parameter
Explanation and setting options
uni�F
standard unit of measurement for volumetric flow
uni�T
standard unit of measurement for temperature
uni�P
standard unit of measurement for pressure
dAP�F
measured value damping for volumetric flow
dAP�P
measured value damping for pressure
P-n
output logic
MEdi
medium selection (only available for SDx6xx)
LFC
low flow cut-off
rEF�P
standard pressure to which the measured and display values for volumet-
ric flow refer
rEF�T
standard temperature to which the measured and display values for
volumetric flow refer
coF
Zero-point calibration for pressure measurement� The internal measured
value "0" is shifted by this value�