![background image](http://html1.mh-extra.com/html/ifm/sbg2-series/sbg2-series_operating-instructions-manual_4163862020.webp)
20
9.3.4 User settings (optional)
9.3.5 Set the standard unit of measurement for volumetric flow
►
Select [uni] and set the unit of measurement: l/min, m
3
/h (SBN2xx: gpm,
gph)�
The selectable units of measurement depend on the respective unit�
Menu CFG:
[uni]
9.3.6 Configuration of the standard display
►
Select [SELd] and determine the standard measuring unit:
-[FLOW] = the current volumetric flow value in the standard unit of
measurement is displayed�
-[TEMP] = the current medium temperature in °C is displayed (SBN2xx:
°F)�
►
Select [diS] and set the update rate and orientation of the display:
-[d1]: update of the measured values every 50 ms�
-[d2]: update of the measured values every 200 ms�
-[d3]: update of the measured values every 600 ms�
-[rd1], [rd2], [rd3]: display as for d1, d2, d3; rotated by 180°�
-[OFF] = The measured value display is deactivated in the Run mode�
The LEDs remain active even if the display is deactivated� Error mes-
sages are displayed even if the display is deactivated�
Menu DIS:
[SELd]
[diS]