IFM OPD101, Operating Instructions Manual

Page: 31 / 40

OPD101
31
11.2.3 [Configuration]
Configuration of the operating mode and the switching outputs. Submenu [Configuration] ( Ò / 31).
u Confirm the parameter with [●].
w The display changes to the configuration settings.
u
Select one of the following options using [▲ / ▼].
1. [Triggered mode]
2. [Trigger source]
3. [Trigger delay]
4. [Integration time]
5. [Output function]
6. [Output logic]
7. [Profile source select]
8. [Back]
11.2.4 [Display]
Configuration of the display
u Confirm the parameter with [●].
w The display changes to the display settings.
u
Select one of the following options using [▲ / ▼].
1. [Brightness]
2. [Colour]
3. [Language]
4. [Back]
11.2.5 [Back]
Finish parameter setting
u Confirm the parameter with [ENTER].
w The display changes to menu level 1.
11.3 Submenu [Configuration]
11.3.1 [Triggered mode]
Set operating mode
u Confirm the parameter with [●] and select one of the options [CONT] / [TRIG] using [▲ / ▼].
u
Confirm your selection by pressing [●].
w
The operating mode is confirmed.
• [CONT]: Continuous trigger mode. Continuous mode (
Ò /
27).
• [TRIG]: Triggered mode. Triggered mode (
Ò /
27).
GB