6
6 Setting /operation
1
3
2
5
4
10..
.
3
0
OUT1
PNP
100 mA
PNP
OUT2
100 mA
V
D
C
1: Setting marks
2: LED yellow: Set1 value reached, output = ON
3: Locking ring
4: Setting ring (manually adjustable after unlocking)
5: LED green: operating voltage OK
• To achieve the setting accuracy: First position the setting ring to the upper end
stop value, then to the requested value�
►
After installation, electrical connection and programming, check whether the
unit operates correctly�
Lifetime of a laser diode: 50,000 hours
7 IO-Link
7.1 General information
This unit has an IO-Link communication interface which requires an IO-Link-
capable module (IO-Link master) for operation�
The IO-Link interface enables direct access to the sensor values and parameters
and provides the possibility to set the parameters of the unit during operation�
In addition communication is possible via a point-to-point connection with a USB
adapter cable�
You will find more detailed information about IO-Link at www�ifm�com�
