10
6.4 Setting of the pulse stretching
The length of the output signal can be adjusted� If the object does not stay in the
detection zone long enough, it is possible to stretch the pulse time�
1
►
Press [OUT on] for > 6 s to < 20 s�
> The green LED flashes with 4 Hz, the
yellow LED indicates the switching
status�
> The row of LEDs indicates the pulse
stretching�
2
Set the pulse stretching time.
►
Press [OUT off] to reduce the pulse
stretching time�
►
Press [OUT on] to increase the pulse
stretching time�
-1 push on the button corresponds to
1 ms�
-Fast forward by keeping the button
pressed�
0
1 - 10
11 - 20
21 - 30
31 - 40
41 - 50
51 - 60
61 - 70
71 - 80
81 - 90
time
(ms)
lighting LEDs
3
Exit setting
►
Press [OUT on] + [OUT off] simultane-
ously�
> The unit changes to the normal operat-
ing mode�
