Electronic level sensor
LW2120
15
5.5 Installing the mounting bracket
90°
Fig. 10: Horizontal installation of the mounting bracket
90°
Fig. 11: Vertical installation of the mounting bracket
u
Align and install the mounting bracket on a flat surface.
u
To be able to change the device mounting area of the bracket, loosen the fixing screws of the
bracket.
u
Align the device mounting area of the bracket parallel to the surface of the medium.
u
Hand-tighten the fixing screws of the mounting bracket.
5.6 Mounting the antenna extension
For applications in or above tanks / plastic tanks, the unit must be combined with the antenna
extension. Intended use (
5.6.1 Remove the protective cap
The protective cap protects the antenna from impacts during transport and storage.