background image

3

UK

8�8�1  Carry out the full adjustment via teach input ��������������������������������������21

8�8�2  Changing the output function ��������������������������������������������������������������21

8�8�3  Fault during the teach operation ���������������������������������������������������������22

9 Operation �����������������������������������������������������������������������������������������������������������22

9�1  Switching states and display by LEDs ���������������������������������������������������������22

9�2  System results IO-Link���������������������������������������������������������������������������������23

10  Maintenance, repair and disposal ��������������������������������������������������������������������23
11  Notes on the regulation (EC) 1935/2004 ���������������������������������������������������������24
12  Factory setting �������������������������������������������������������������������������������������������������24

1  Preliminary note

Technical data, approvals, accessories and further information at  

www�ifm�com

1.1  Explanation of symbols

Instructions

>

Reaction or result

[…] Designation of keys, buttons or indications

Cross-reference
Important note 

Non-compliance may result in malfunction or interference�
Information 

Supplementary note

Summary of Contents for LMT 0 Series


























Reviews: