IFM JD, Device Manual, Page: 24 / 43

24
9.10 Object 1010h - Store Parameters
This object controls the saving of all writable parameters in non-volatile memory�
Sub-index Meaning Data type Default value Access
0 Number of sub-indices Unsigned 8 4 ro
1 Save all parameters Unsigned 32 - rw
2 Save communication
parameters
Unsigned 32 - rw
3 Save application
parameters
Unsigned 32 - rw
4 Save manufacturer
parameters
Unsigned 32 - rw
Storing Procedure: To save the parameters to non-volatile memory, the access
signature "save" has to be sent to the corresponding sub-index of the device�
Most significant word Least significant word
ASCII e v a s
Hex value 65h 76h 61h 73h
9.11 Object 1011h - Restore Parameters
With this object, writable device and CANopen related parameters are reset to
factory settings�
Sub-index Meaning Data type Default value Access
0 Number of sub-indices Unsigned 8 4 ro
1 Restore all parameters Unsigned 32 - rw
2 Restore communication
parameters
Unsigned 32 - rw
3 Restore application
parameters
Unsigned 32 - rw
4 Restore manufacturer
parameters
Unsigned 32 - rw
Loading procedure: To load the parameters from non-volatile memory, the access
signature "load" has to be sent to the corresponding sub-index of the device�
Most significant word Least significant word
ASCII d a o l
Hex value 64h 61h 6Fh 6Ch
Sub-index Meaning Data type Default value Access
0 – Unsigned 16 0x80+Node-ID rw
When the message has been transmitted, restart is required�