4
– The system manufacturer is responsible for the functioning of the application
programs.
– If the sensor is damaged, the safety-related function cannot be guaranteed.
Errors caused by damage will not cause transition to the safe state.
– If necessary, the system manufacturer has to obtain an approval from the
competent supervisory and test organisations for the system’s safety-related
functions according to the applicable regulations.
– For applications of functional safety, the system manufacturer must assure
the conformity of the system and the corresponding application programs in
accordance with the applicable regulations. Certification by a competent
organisation may be required.
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose (
Ò
Intended use).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
2.1 Safety-related requirements regarding the application
It must be ensured that the safety requirements of the respective application
correspond to the requirements stated in these instructions.
