4
2 Safety instructions
• Follow the operating instructions�
• Improper use may result in malfunctions of the unit� This can lead to personal
injury and/or damage to property during operation of the machine� For this
reason note all remarks on installation and handling given in these instructions�
Also adhere to the safety instructions for the operation of the whole installation�
• In case of non-observance of notes or standards, specially when tampering
with and/or modifying the unit, any liability and warranty is excluded�
• The unit must be installed, connected and put into operation by a qualified
electrician trained in safety technology�
• The applicable technical standards for the corresponding application must be
complied with�
• For installation the requirements according to EN 60204 must be observed�
• In case of malfunction of the unit please contact the manufacturer� Tampering
with the unit is not allowed�
• Disconnect the unit externally before handling it� Also disconnect any
independently supplied relay load circuits�
• After setup the system has to be subjected to a complete function check�
• Use the unit only in specified environmental conditions (→ 10 Technical data)�
In case of special operating conditions please contact the manufacturer�
• Use only as described below (→ 4)�
2.1 Safety-related requirements regarding the application
It must be ensured that the safety requirements of the respective application
correspond to the requirements stated in these instructions�
Observe the following requirements:
► Take measures to avoid metallic objects being placed on the sensing face
intentionally or unintentionally�
► Adhere to EN 1088 for interlocking devices associated with guards�
► Adhere to the specified operating conditions (→ 10 Technical data)� Use of
the sensor in the vicinity of chemical and biological media as well as ionising
radiation is not permitted�
