ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
Device update to new software version
92
5.10.3
Device update via web browser
9379
9.
►
Set the network properties matching the IP address and the subnet mask of the device in
the PC.
10.
►
Start the web browser on the PC.
11.
►
Enter the IP address shown in the
ifm
recovery screen as web address.
12.
> The web interface of the device appears in the browser.
> The web interface directly changes to [Software Recover].
13.
►
Click the button [Browse].
14.
> The Windows browser opens.
15.
►
Open the directory with the update file.
►
Double click the update file (
Vxx.yy.zz_PDM360NG.ifm
).
16.
►
Click the button [send].
17.
> The installation process is running.
18.
►
Remove the cover of the reset key on the rear panel of the PDM.
19.
> The installation process is finished after some minutes.
> Display: request to press the reset key within 180 seconds.
20.
►
Press the reset key.
21.
> The PDM restarts.
> Display of the new version of the operating system.
> Display of the splash screen.
> FINISHED