UK
IO-Link master
47
33 Setup as per STEP 7
33.1 Description of the setup of the device on a SIMATIC® S7 controller.
This document describes specific features associated with the setup of AL1000 on
an S7 controller�
This document is intended for S7 specialists� It does not cover a complete project,
just specific features associated with the use of the device�
It is assumed that the user has knowledge of and experience in the operation of
PCs and Windows operating systems and knowledge of the Siemens SIMATIC
software and Ethernet basics�
34 System requirements
34.1 Software
You are working with the software STEP 7 version 5�5, service pack 3 (version
K5�5�3�0)�
34.2 Hardware
Hardware requirements for the Siemens SIMATIC software:
Please refer to the S7 documentation for the hardware requirements�
35 Integrate ifm ProfiNet device in the S7 controller (STEP 7)
To integrate the device into the network, proceed as described in the
manufacturer's documentation for your controller� This section only explains
fundamental steps that are relevant for the connection with the device�
35.1 Creating/opening a project
► In the Siemens SIMATIC Manager, create a new project or open an existing
project�
