![background image](http://html1.mh-extra.com/html/ifm/ecomat-200-series/ecomat-200-series_operating-instructions-manual_3874058011.webp)
Programming
For programming terminals 6 and 7 must be linked, e.g. by means of
a key switch.
Operation of the unit is maintenance-free.
P
P
P
1
2
3
4
5
Press briefly.
The parameter address is
displayed, decade 2 is flashing.
The actuele parameter value is
displayed (1st place is flashing).
Press briefly
(= acknowledgement of
the parameter value).
Changing into operating mode;
actual value is displayed.
Press this key to increment
in active decade.
Press this key to change
from one decade to the
other.
The active decade is flashing.
Press this key to increment
in active decade.
Press this key to change
from one decade to the
other.
The active decade is flashing.
Press briefly
(= acknowledgement of
the parameter address).
Interrupt the supply voltage briefly so that the new parameters become effec-
tive.
If no key is pressed during the programming process for approx. 15s, the unit
will change into the operating mode with unchanged parameter values.