E2M231 / E2M232 monitor for analogue cameras
4
1 Preliminary note
This document describes the operation of the E2M23x monitor for analogue cameras .
1.1 Symbols used
►
Instructions
>
Reaction, result
[…] Designation of keys and keys
"…" Name of display text
→
Cross-reference
Important note
Non-compliance may result in malfunction or interference .
Information
Supplementary note
1.2 Warnings used
NOTE
Warning of damage to property .
2 Safety instructions
2.1 General
These instructions are an integral part of the device . They contain texts and figures concerning the correct
handling of the device and must be read before installation or use .
Observe the operating instructions . Non-observance of the instructions, operation which is not in
accordance with use as prescribed below, wrong installation or incorrect handling can seriously affect the
safety of operators and machinery .
2.2 Target group
These instructions are intended for authorised persons according to the EMC and low-voltage directives .
The device must be installed, connected and put into operation by a qualified electrician .
2.3 Electrical connection
Disconnect the unit externally before handling it .
The connection pins may only be supplied with the signals indicated in the technical data and on the
device label and only the approved accessories of ifm may be connected .
2.4 Tampering with the device
In case of malfunctions or uncertainties please contact the manufacturer . Any tampering with the
device can seriously affect the safety of operators and machinery . This is not permitted and leads to the
exclusion of any liability and warranty claims .
NOTE
The display is sensitive to pressure . Touching the display may result in permanent pixel errors .
►
Do not touch the screen .