13
E2M231 / E2M232 monitor for analogue cameras
UK
6.3.5 LCD backlight
The background illumination of the screen is set in the
[LCD backlight] menu .
●
[LCD backlight mode]: Set one of the following modes for the
background illumination:
– [ABC]: Automatic setting of the brightness depending on the
ambient light . The brightness sensor is above the [Plus / +]
key .
– [A_R]: Automatic setting of the brightness depending on the
ambient light . A red colour palette is used . The brightness
sensor is above the [Plus / +] key .
– [A_B]: Automatic setting of the brightness depending on the
ambient light . A blue colour palette is used . The brightness
sensor is above the [Plus / +] key .
– [DAY]: Day mode . Set the brightness to 100 % . The LED
above the [Day / Night setting] key is permanently on . Use
the [Plus / +] and [Minus / -] keys to vary the brightness
between 50 % and 100 % .
– [NIT]: Night mode . The brightness is set to 20 % . Use the
[Plus / +] and [Minus / -] keys the vary the brightness between
0 % and 50 % .
– [N_R]: Night mode . The brightness is set to 20 % . A red
colour palette is used . Use the [Plus / +] and [Minus / -] keys
to vary the brightness between 0 % and 50 % .
– [N_B]: Night mode . The brightness is set to 20 % . A blue
colour palette is used . Use the [Plus / +] and [Minus / -] keys
to vary the brightness between 0 % and 50 % .
●
[ABC minimum level]: Set a minimum value for the automatic
background illumination (modes [ABC], [A_R,] and [A_B]) .
●
[LCD backlight day]: Set the brightness during the day between
50 % and 100 % ([DAY] mode) .
●
[LCD backlight night]: Set the brightness during the night
between 0 % and 50 % ([NIT, [N_R,] and [N_B] modes) .
6.3.6 Scanning
The behaviour of the [Scan / Back in menu] key is set in the
[Scanning] menu (→ „4 Function keys“).
●
[Scan sequence]: Select the cameras to be scanned .
●
[Scan interval]: Set the display time of the cameras to be
scanned in seconds .
