DI604A
Compact speed monitor M18
4
2 Safety instructions
•
The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (
Ò
Intended use).
•
If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
•
Protect units and cables against damage.
2.1 Use in hazardous areas
Observe the instructions for safe use in hazardous areas:
operating instructions (Ex protection related part) for speed monitors according to EU directive
2014/34/EU annex VIII (ATEX) group II, equipment category 3D.
If no operating instructions (Ex protection related part) or EC declaration of conformity are supplied
with this product in the language of the EU user country, these can be requested from your dealer
(see delivery note) or manufacturer.
