DI604A
Compact speed monitor M18
18
10 s
...
1 Hz
Teach SP1
...
dSt = 0 s
dSt
SSC1.1 Config. Logic = Low active
SSC1.1 Config. Logic
SSC1.1 Config. Logic = High active
dSt = 1...14 s
+ 1 s
+ 1 s
...
1 Hz
...
2 Hz
SP1
SP1
1 Hz
>15 s
...
Operating mode
Parameter setting mode
Switch point SP1
Start-up delay
Output function
Parameter setting:
u
Set the push ring to [●] for 10 s.
The LED flashes green with a frequency of 1 Hz during these 10 s.
w
The LED flashes yellow twice for confirmation; then green with a frequency of 1 Hz.
w
The unit is in the parameter setting mode for the switch point.
u
Set the push ring to [▼] to change to the parameter setting mode for the start-up delay.
OR
Set the push ring to [●] to teach SP1.
w
The LED flashes green with the damping frequency, however with a maximum frequency of 8
Hz.
w
The unit is ready for SP1 teaching.
Wait at least one period before teaching SP1!
If PrSC=1, this corresponds to one revolution.
