UK
Installation instructions CANremote CR3114
23
► Insert the SIM card into the cut-out of the card holder�
► Insert the card holder with the SIM card into the slot without much pressure
until you feel a stop�
When inserting the card, make sure that the SIM card holder is exactly in the
guides of the slot and that it is not jammed�
► Close the housing�
NOTE
Before closing the housing again, make sure that the washer is clean and
undamaged�
IP 65 can only be guaranteed if the housing is correctly screwed�
Tightening torque of the housing screw connection: 1�2���1�5 Nm
7.3.1 Remove the SIM card
► Disconnect the device�
► Open the housing�
► Press the SIM eject button using a pointed object�
► Remove the card holder�
► Remove the SIM card from the card holder�
► Close the housing�
► Observe the warning (→ 7.3 Insert the SIM card)�
8 Operation
The device is operational after configuration and when the SIM card has been
inserted� After power on the device logs in to the GSM network�
If the automatic server dialling was selected in the parameter settings, the device
logs in automatically to the PROEMION web portal�
As an alternative, this selection can also be made from the application�
