background image

CompactModul Metall CR2033

26

12  Terms and abbreviations

0b ���

binary value (for bit coding), e�g� 0b0001 0000

0d ���

decimal numerical value, e�g� 0d100

0x ���

hexadecimal value, e�g� 0x64 (= 100 decimal)

Baudrate

transmission speed (1 baud = 1 bit/s)

CAL

CAN Application Layer

CAN-based network protocol on application level

CAN

Controller Area Network (bus system for use in mobile applications)

CAN_H

CAN-High; CAN connection /cable with high voltage level

CAN_L

CAN-Low; CAN connection /cable with low voltage level

CANopen 

CAN-based network protocol on application level with an open configuration 

interface (object directory)

CiA

"CAN in Automation e�V�"

(user and manufacturer organisation in Germany/Erlangen)

Definition and control body for CAN and CAN-based network protocols

CiA DS

Draft Standard (published CiA specification which usually has not been modified 

or supplemented for one year)

CiA DSP

Draft Standard Proposal (published CiA specification draft)

CiA WD

Work Draft (work draft accepted for discussion within CiA)

CiA DS 301

Specification for CANopen communication profile;

describes the basic communication between network participants, such as the 

transfer of process data in real time, the exchange of data between units or 

the configuration stage� Depending on the application this is completed by the 

following CiA specifications:

CiA DS 401

Device profile for digital and analogue I/O modules

CiA DS 402

Device profile for drives

CiA DS 403

Device profile for HMI

CiA DS 404

Device profile for measurement and control technology

CiA DS 405

Specification for interfaces to programmable systems (IEC 61131-3)

CiA DS 406

Device profile for encoders

CiA DS 407

Application profile for local public transport

COB

CANopen Communication Object (PDO, SDO EMCY, ���)

COB-ID

CANopen Identifier of a Communication Object

Communication cycle

the synchronisation time to be monitored, max� time between 2 Sync objects

EMCY Object

Emergency Object (alarm message, device indicates an error)

Error Reg

Error Register (entry with an error code)

Guarding Error

Node or network participant could or can no longer be found

Guard Master: one or several slaves no longer reply

Guard Slave: no polling of the slave

Guard Time

During this time the network participant expects a "Node Guarding" of the 

network master

Summary of Contents for CR2033





























Reviews: