UK
CompactModul Metall CR2033
21
Index
S-Idx Name
Typ
Default Beschreibung
*) Observe hex-code switch position!
Entries under 20F0/20F1 and 20F2/20F3 are only valid if the hex-code switches for baud rate (S1)
and/or node ID (S2, S3) are in the position "F"�
(for position and coding of the hex-code switches --> 7 Technical data)
9.2 Manufacturer Specific Profile Area; index 1000 to 1FFF
Index S-Idx
Name
Typ
Default
Beschreibung
1000 0
Device type
u32, ro
0x000F0191
Profile 401;
Inputs and outputs, binary and analogue
1001 0
Error register
u8, ro
0x00
Bit-coded to profile 301,
the following is supported:
0b 0000 0000 no error
0b 0000 0001 generic error
0b 0001 0000 communication error
0b 1000 0000 manufacturer specific
1003 0
Pre-defined
errorfield
u8, ro
0x04
An error list with 4 entries is supported�
1
Error history
u64, ro
0x00
Error occured, coded according to the EM-
CY list, the last error is in the subindex 1�
1005 0
COB-ID
synch objekt
u32, rw
0x00000080
- Module generates no synch message
(bit 30 = 0)
- 11-bit identifier system (bit 29 = 0)
- Identifier of the synch message
1006 0
Communic�
Cycle
u32, rw
0x00000000
Max. time between 2 synch objects in μs
Useful resolution = 1ms
1008 0
Device name
str, ro
CR2033
Device name
1009 0
HW Version
str, ro
x�x
Hardware version
100A 0
SW Version
str, ro
x�x
Software version
100C 0
Guard time
u16, rw
0x0000
Time in ms
Within this time the output module expects
a "node guarding" of the network master�
If the value 0 is entered here, this function
is not supported�
Note:
Node monitoring with "node guarding"
or "heartbeat" can only to be used as an
alternative�
