background image

AL4103

Remote I/O module 16 DI

26

9.1.8 Counters: Control counter modules

Available parameters:

Name

Description

Value range

Access

[disable]

Disable main counter and batch coun-
ter

• 0: counter module is active (default)

• 1: counter module is not active

rw 

1

[reset]

Reset main counter, batch counter
and CT and CTb thresholds to initial
values

• 0: no action (default)

• 1: reset

rw 

1

[direction] 

2

Set counting direction for main and
batch counter

• 0: up (default)

• 1: down

rw 

1

1

read and write; can only be changed if no connection to the fieldbus controller is active

2

only effective if operating mode of counter module = 

CTDIR

Requirements:

ü

The parameter setting software has been started.

ü

The detailed view of the device is active.

u

Select the menu option [io] > [counter[n]] (n: 1…8).

w

The menu page displays the available parameters.

u

Optional: disable counter module.

u

Optional: reset counter module.

u

Optional: set counting direction of counter module.

u

Write the changed parameter values to the device.

w

Selected actions are executed.

9.1.9 Counters: Read counter values

Available parameters:

Name

Description

Value range

Access

[maincounter_value]

Main counter value

0…4294967294

ro 

1

[batchcounter_value]

Batch counter value

0…65534

ro 

1

1

read only

Requirements:

ü

The parameter setting software has been started.

ü

The detailed view of the device is active.

u

Select the menu option [io] > [port[n]] (n: 1…8).

w

The menu page displays the current counter values of the main and batch counter.

9.1.10 Gateway: Read identification information

Available information:

Name

Description

Value range

Access

[productcode]

Article number

AL4103

ro 

1

[devicefamily]

Device family

Ethernet modules

ro 

1

[vendor]

Manufacturer

ifm electronic gmbh

ro 

1

[swrevision]

Firmware revision

e.g. AL4x0x_fw_pn_v1.4.0.137

ro 

1

[hwrevision]

Hardware revision (status)

e.g. AA

ro 

1

Summary of Contents for AL4103






































































Reviews: