
IO-Link Master with IoT Interface CabinetLine 8 Ports IP 20
24
>
9.1
LR DEVICE
Content
Remarks .................................................................................................................................................25
IoT: Configure IP settings .......................................................................................................................26
IoT: Configure the interface to the LR SMARTOBSERVER ..................................................................27
IO-Link ports: Activate data transfer to the LR SMARTOBSERVER ....................................................28
IO-Link ports: Configure operating mode ...............................................................................................29
IO-Link ports: Set the device validation and data storage ......................................................................30
IO-Link ports: Configuration of fail-safe values ......................................................................................31
Info: Show device information ................................................................................................................31
Firmware: Reset device to factory settings ............................................................................................32
Firmware: Reboot the device..................................................................................................................32
Configure IO-Link devices ......................................................................................................................33
33692
On delivery, the AL1950 is configured with the factory settings (
→
Factory settings
(
Required software: LR DEVICE (1.4.0.n or higher) (art.-no.: QA0011/QA0012)