IFM AL19 Series, Operating Instructions Manual

Page: 7 / 10

7
UK
7 Factory settings
AL1900
PROFINET
AL1920
EtherNet/IP
AL1930
EtherCAT
AL1940
Modbus TCP
AL19xx
IoT (Internet
of Things)
IP address 0.0.0.0 192.168.1.250 — 192.168.1.250 169.254.X.X
IP addressing DCP Static IP
address
— Static IP
address
DCP, DHCP,
Auto IP
Subnet mask 0.0.0.0 255.255.255.0 — 255.255.255.0 255.255.0.0
Gateway IP
address 0.0.0.0 0.0.0.0 — 0.0.0.0 0.0.0.0
MAC address See type label
8 Parameter setting
The parameter setting and configuration of the field bus interface is done via the
higher-level PLC.
As an option, the connected IO-Link devices can be configured with the ifm
software LR DEVICE.
9 Maintenance, repair, disposal
The device is maintenance-free.
► Disconnect the device.
► Clean the device from dirt using a soft, chemically untreated and dry cloth. Do
not use any caustic cleaning agents for this.
9.1 Disposal
► Dispose of the device in accordance with the applicable national environmental
regulations.